Description
Extreme Edge gear box placement makes this the most versatile binder Speedbinders has produced. Grease zerk is standard. You also receive a grease zerk protection ring for long life (customer installed). To offer some clarity, the hooks are marked 3/8 – 1/2 but this binder conveniently works with 5/16 chain as well. The ultimate for the Steel Hauler / Big Chain Rental Companies / Construction / Excavating / Bobcats / Heavy Equipment . 2” longer handle than our standard arm, Zinc coated rings, hooks and post threads. We are 25 to 1 gear reduced on this model. Long handle off set to bring the gear set closer to the operator for easier operation. The handle is a reaction bar. Needs to be in contact with the floor or steel for proper tension retention.
Item not warrantied if impact is used for tightening.
It is recommended to use a drill with approximately 800 Lb.-In. maximum torque output to provide adequate tensioning of the load (DeWalt DCD991P2). We recommend a drill instead of an impact driver for several reasons:
A drill has superior torque.
A drill has speed and torque. Run in either third or second for slack pick up, drop her into first for final tightness.
A drill with multiple five-amp-per-hour batteries should give a driver two to three full days of operation.
A drill with many torque settings will allow the driver to set the chain tightness to his liking.
